Battery_electromechanical_papers.bib

@inproceedings{Kim2014a,
  author = {Kim, Y. and Mohan, S. and Samad, N. and Siegel, J.B. and Stefanopoulou, A.G.},
  title = {Optimal Power Management for a Series Hybrid Electric Vehicle Cognizant of Battery Mechanical Effects},
  booktitle = {in Proceedings of American Control Conference (ACC) 4-6 June 2014},
  year = {2014},
  pages = {3832,3837},
  doi = {10.1109/ACC.2014.6859505},
  file = {papers\optimalpowermanagementbatterymechanical.pdf},
  owner = {choonhun},
  timestamp = {2015.02.10}
}

@article{Mohan2014,
  author = {Mohan, Shankar and Kim, Youngki and Siegel, Jason B. and Samad, Nassim A. and Stefanopoulou, Anna G.},
  title = {A Phenomenological Model of Bulk Force in a Li-Ion Battery Pack and Its Application to State of Charge Estimation},
  journal = {Journal of The Electrochemical Society},
  year = {2014},
  volume = {161},
  number = {14},
  pages = {A2222-A2231},
  doi = {10.1149/2.0841414jes},
  file = {papers/J. Electrochem. Soc.-2014-Mohan-A2222-31.pdf},
  owner = {choonhun},
  timestamp = {2015.01.29},
  url = {http://jes.ecsdl.org/content/161/14/A2222.full.pdf+html}
}

@inproceedings{Mohan2015,
  author = {Mohan, S. and Kim, Y. and Stefanopoulou, A.},
  title = {On improving battery state of charge estimation using bulk force measurements},
  booktitle = {ASME 2015 Dynamic Systems and Control Conference},
  year = {2015},
  number = {DSCC2015-9966},
  address = {Columbus, Ohio},
  month = {October},
  abstract = {Lithium-ion (Li-ion) batteries undergo physical deformation
as their state-of-charge (SOC) changes. The physical deformation
causes changes in the pressure (equivalently, force) applied
at the end-plates of a constrained battery pack or module. This
paper proposes the fusion of bulk force and battery voltage measurements
to estimate the SOC in Li-ion battery packs. In this
paper, using discrete Linear Quadratic Estimators (dLQEs), the
advantage of using force measurements in addition to voltage
measurement to improve SOC estimates is quantitatively studied
through simulations. It is observed that including force measurements
can decrease the mean and standard deviation of SOC
estimation error by 50% in some SOC intervals.},
  doi = {10.1115/DSCC2015-9966},
  file = {papers/onimprovingbatterystateofcharge.pdf},
  url = {http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2481891}
}

@inproceedings{Mohtat2017,
  author = {P. Mohtat and F. Nez and S. Mohan and J. B. Siegel and A.G. Stefanopoulou},
  title = {On identifying the aging mechanisms in li-ion batteries using two points measurements},
  booktitle = {IEEE American Control Conference (ACC)},
  year = {2017},
  pages = {98-103},
  doi = {10.23919/ACC.2017.7962937},
  file = {papers_battery/Mohtat2017ACC.pdf}
}

@article{Oh2014,
  title = {Rate dependence of swelling in lithium-ion cells },
  author = {Ki-Yong Oh and Jason B. Siegel and Lynn Secundo and Sun Ung Kim and Nassim A. Samad and Jiawei Qin and Dyche Anderson and Krishna Garikipati and Aaron Knobloch and Bogdan I. Epureanu and Charles W. Monroe and Anna Stefanopoulou},
  journal = {Journal of Power Sources},
  year = {2014},
  number = {0},
  pages = {197 - 202},
  volume = {267},
  abstract = {Abstract Swelling of a commercial 5 Ah lithium-ion cell with a nickel/manganese/cobalt-oxide cathode is investigated as a function of the charge state and the charge/discharge rate. In combination with sensitive displacement measurements, knowledge of the electrode configuration within this prismatic cell's interior allows macroscopic deformations of the casing to be correlated to electrochemical and mechanical transformations in individual anode/separator/cathode layers. Thermal expansion and interior charge state are both found to cause significant swelling. At low rates, where thermal expansion is negligible, the electrode sandwich dilates by as much as 1.5% as the charge state swings from 0% to 100% because of lithium-ion intercalation. At high rates a comparably large residual swelling was observed at the end of discharge. Thermal expansion caused by joule heating at high discharge rate results in battery swelling. The changes in displacement with respect to capacity at low rate correlate well with the potential changes known to accompany phase transitions in the electrode materials. Although the potential response changes minimally with the C-rate, the extent of swelling varies significantly, suggesting that measurements of swelling may provide a sensitive gauge for characterizing dynamic operating states.},
  doi = {10.1016/j.jpowsour.2014.05.039},
  file = {papers_battery\1-s2.0-S0378775314007228-main.pdf},
  issn = {0378-7753},
  keywords = {Lithium-ion battery},
  owner = {choonhun},
  timestamp = {2014.06.17},
  url = {http://www.sciencedirect.com/science/article/pii/S0378775314007228}
}

@article{Oh2016,
  author = {Ki-Yong Oh and Bogdan I. Epureanu and Jason B. Siegel and Anna G. Stefanopoulou},
  title = {Phenomenological force and swelling models for rechargeable lithium-ion battery cells},
  journal = {Journal of Power Sources},
  year = {2016},
  volume = {310},
  pages = {118-129},
  doi = {10.1016/j.jpowsour.2016.01.103},
  file = {papers_battery\Oh2016JPS.pdf}
}

@article{Oh2016a,
  author = {K.-Y. Oh and N. Samad and Y. Kim and J. Siegel and A. Stefanopoulou and Bogdan I. Epureanu},
  title = {A Novel Phenomenological Multi-Physics Model of Li-Ion Battery Cells},
  journal = {Journal of Power Sources},
  year = {2016},
  volume = {326},
  pages = {447-458},
  doi = {10.1016/j.jpowsour.2016.07.019},
  file = {papers_battery\Oh2016JPSmultiphysics.pdf}
}

@inproceedings{Samad2015,
  author = {N. Samad and J. B. Siegel and A. Stefanopoulou and A. Knobloch},
  title = {Observability analysis for surface sensor location in encased battery cells},
  booktitle = {IEEE American Control Conference (ACC)},
  year = {2015},
  pages = {299-304},
  doi = {10.1109/ACC.2015.7170752},
  file = {papers_battery/Samad2015ACC.pdf}
}