J.R.Barber: List of Publications

For copies of these publications (other than the books), please contact me at:-

J.R.Barber,
Department of Mechanical Engineering
University of Michigan
2350 Hayward Street
Ann Arbor MI  48109-2125

Tel: (734) 936-0406
FAX: (734) 647-3170
E-mail: jbarber@umich.edu

Books and Chapters in Books

  1. J.R. Barber and M. Comninou, Thermoelastic contact problems, in Thermal Stresses III ( ed. R. Hetnarski), North Holland, Amsterdam (1989), pp.1-106.
  2. J.R.Barber, Elasticity, Springer, Dordrecht, 3rd edn. (2010), 534pp.
  3. J.R.Barber and M.Ciavarella, Contact Mechanics, in Research Trends in Solid Mechanics, ( ed. G.Dvorak), Int.J.Solids Structures, Vol.37 (2000), pp.29-43.
  4. J.R.Barber, Intermediate Mechanics of Materials, Springer, Dordrecht, 2nd edn. (2011), 618pp.
  5. J.R.Barber, Instability of thermoelastic contact, in Joao A.C.Martins and Michel Raous, eds., Friction and Instabilities, Springer-Verlag, Vienna, 2002, pp. 1-37.
  6. Yun-Bo Yi, J.R.Barber and D.L.Hartsock, Thermoelastic instabilities in automotive disc Brakes - Finite element analysis and experimental verification, in J.A.C.Martins and Manuel D.P.Monteiro Marques eds., Contact Mechanics, Kluwer, Dordrecht, (2002), pp. 187-202.
  7. L.-E.Andersson, A.Klarbring, J.R.Barber and M.Ciavarella, Thermoelastic contact with frictional heating, in P.Alart, O.Maissonneuve and R.T.Rockafellar, eds., Nonsmooth Mechanics and Analysis -- Theoretical and Numerical Advances, Springer-Verlag, Vienna, 2006, pp. 1--37.
  8. J.R.Barber and P.Hild, On wedged configurations with Coulomb friction, in Peter Wriggers and Udo Nackenhorst, eds.,, Analysis and Simulation of Contact Problems, Springer-Verlag, Berlin, 2006, pp. 205--213.
  9. J.R.Barber, Linear elasto-statics, in Continuum Mechanics, Jose Merodio and Giuseppe Saccomandi eds., in Encyclopedia of Life Support Systems (EOLSS), Developed under the Auspices of the UNESCO, Eolss Publishers, Oxford ,UK (2008), [http://www.eolss.net]
  10. J.R.Barber and Y-J. Ahn, Discrete Coulomb frictional systems subjected to periodic loading, in G. E. Stavroulakis, eds.,, Recent Advances in Contact Mechanics, Springer-Verlag, Berlin, 2012, pp. 1--11.
  11. J.R.Barber, Contact Mechanics, Springer, Dordrecht, (2018), 585pp.
  12. J.R.Barber, Contact problems involving friction, in Modeling and Simulation of Tribological Problems in Technology, Marco Paggi and David Hills eds., Springer Nature Switzerland AG, 2019, pp. 41--93.

Publications in Archival Journals

  1. J.R. Barber, The influence of thermal expansion on the friction and wear process, Wear, Vol. 10 (1967), pp. 155-159.
  2. J.R. Barber, The distribution of heat between sliding surfaces, Journal of Mechanical Engineering Science, Vol. 9 (1967), pp. 351-354.
  3. J.R. Barber and K. Wright, The thermal distortion due to a uniform circular heat source on the surface of a semi-infinite solid, International Journal of Mechanical Sciences Vol. 9 (1967), pp. 811-815.
  4. J.R. Barber, Heat transfer at the interface of dissimilar metals - the influence of thermal strain, International Journal of Heat and Mass Transfer, Vol. 11 (1968), pp. 617-618.
  5. J.R. Barber, Thermoelastic instabilities in the sliding of conforming solids, Proceedings of the Royal Society of London, Vol. A 312 (1969), pp. 381-394.
  6. J.R. Barber, The conduction of heat from sliding solids, International Journal of Heat and Mass Transfer, Vol. 13 (1970), pp. 857-869.
  7. J.R. Barber, The effect of thermal distortion on constriction resistance, International Journal of Heat and Mass Transfer, Vol. 14 (1971), pp. 751-766.
  8. J.R. Barber, The solution of heated punch problems by point source methods, International Journal of Engineering Science, Vol. 9 (1971), pp. 1165-1170.
  9. J.R. Barber, Thermal contact resistance, International Journal of Heat and Mass Transfer, Vol. 14 (1971), pp. 331-332.
  10. J.R. Barber, Distortion of the semi-infinite elastic solid due to transient surface heating, International Journal of Mechanical Sciences, Vol. 14 (l972), pp. 377-393.
  11. J.R. Barber, Indentation of the semi-infinite elastic solid by a hot sphere, International Journal of Mechanical Sciences, Vol. 15 (1973), pp. 813-819.
  12. J.R. Barber, Frictionally excited thermoelastic instabilities, Wear, Vol. 26 (1973), pp. 425-427.
  13. J.R. Barber, Some mixed boundary value problems for the semi-infinite elastic solid subjected to tangential surface tractions, International Journal of Mechanical Sciences, Vol. 16 (1974), pp. 727-734.
  14. J.R. Barber, Determining the contact area in elastic indentation problems, Journal of Strain Analysis, Vol. 9 (1974), pp. 230-232.
  15. J.R. Barber, The penny-shaped crack in shear and related contact problems, International Journal of Engineering Science, Vol. 13 (1975), pp. 815-829.
  16. J.R. Barber, Steady-state thermal stresses in an elastic solid containing an insulated penny-shaped crack, Journal of Strain Analysis, Vol. 10 (1975), pp. 19-24.
  17. J.R.Barber, Thermoelastic contact of a rotating sphere and a half-space, Wear, Vol. 35 (1975), pp. 283-289.
  18. J.R.Barber, Some thermoelastic contact problems involving frictional heating, Quarterly Journal of Mechanics and Applied Mathematics, Vol. 29 (1976), pp. 1-13.
  19. N. Maw, J.R. Barber and J.N. Fawcett, The oblique impact of elastic spheres, Wear, Vol. 38 (1976), pp. 101-114.
  20. J.R. Barber, Thermal rectification due to distortions induced by heat fluxes across contacts between smooth surfaces, Journal of Mechanical Engineering Science, Vol. 18 (1976), pp. 256-259.
  21. J.R. Barber, Indentation of the semi-infinite elastic solid by a concave rigid punch, Journal of Elasticity, Vol. 6 (1976), pp. 149-159.
  22. J.R. Barber, The disturbance of a uniform steady-state heat flux by a partially conducting plane crack, Int. J. Heat Mass Transfer, Vol. 19 (1976), pp. 956-958.
  23. J.R. Barber, The effect of heat flow on the contact area between a continuous rigid punch and a frictionless elastic half-space, Zeitschrift fur angewandte Mathematik und Physik, Vol. 27 (1976), pp. 439-445.
  24. N. Maw, J.R. Barber and J.N. Fawcett, The rebound of elastic bodies in oblique impact, Mechanics Research Communications, Vol. 4 (1977), pp. 17-22.
  25. J.R. Barber, Force and displacement influence functions for the circular ring, Journal of Strain Analysis, Vol. 13 (1978), pp. 77-81.
  26. J.R. Barber, Contact problems involving a cooled punch, Journal of Elasticity, Vol. 8 (1978), pp. 409-423.
  27. J.R.Barber, Adhesive contact during the oblique impact of elastic spheres, Zeitschrift fur angewandte Mathematik und Physik, Vol. 30 (1979), pp. 468-476.
  28. J.R. Barber, Bending of an incomplete annular plate and related problems, Journal of Strain Analysis, Vol. 14 (1979), pp. 103-109.
  29. J.R. Barber, Steady-state thermal stresses caused by an imperfectly conducting penny-shaped crack in an elastic solid, Journal of Thermal Stresses, Vol. 3 (1979), pp. 77-83.
  30. J.R. Barber, The transient thermoelastic contact of a sphere sliding on a plane, Wear, Vol. 59 (1980), pp. 21-29.
  31. J.R. Barber, The rolling contact of misaligned elastic cylinders, Journal of Mechanical Engineering Science, Vol. 22 (1980), pp. 125-128.
  32. J.R. Barber, J. Dundurs and M. Comninou, Stability considerations in thermoelastic contact, ASME Journal of Applied Mechanics, Vol. 47 (1980), pp. 871-874.
  33. J.R. Barber, Some implications of Dundurs' theorem for thermoelastic contact and crack problems, Journal of Mechanical Engineering Science, Vol. 22 (1980), pp. 229-232.
  34. N. Maw, J.R. Barber and J.N. Fawcett, The role of elastic tangential compliance in oblique impact, ASME Journal of Lubrication Technology, Vol. 103 (1981), pp. 74-80.
  35. M. Comninou, J. Dundurs and J.R. Barber, Planar Hertz contact with heat conduction, ASME Journal of Applied Mechanics, Vol. 48 (1981), pp. 549-554.
  36. J.R. Barber, Stability of thermoelastic contact for the Aldo model, ASME Journal of Applied Mechanics, Vol. 48 (1981), pp. 555-558.
  37. M. Comninou, J.R. Barber and J. Dundurs, Heat conduction through a flat punch, ASME Journal of Applied Mechanics, Vol. 48 (1981), pp. 871-875.
  38. J.R. Barber and M. Comninou, The external axisymmetric interface crack with heat flow, Quarterly Journal of Mechanics and Applied Mathematics, Vol. 35 (1982), pp. 403-417.
  39. J.R. Barber and C.J. Martin-Moran, Green's functions for transient thermoelastic contact problems for the half-plane, Wear, Vol. 79 (1982), pp. 11-19.
  40. M. Comninou, J.R. Barber and J. Dundurs, Disturbance at a frictional interface caused by a plane elastic pulse, ASME Journal of Applied Mechanics, Vol. 49 (1982), pp. 361-365.
  41. J.R. Barber, M. Comninou and J. Dundurs, Contact transmission of wave motion between two solids with an initial gap, International Journal of Solids and Structures, Vol. 18 (1982), pp. 775-781.
  42. M. Comninou and J.R. Barber, The plane external crack, International Journal of Engineering Science, Vol. 20 (1982), pp. 695-696.
  43. J.R. Barber and M. Comninou, Rolling of elastic cylinders with friction at supersonic speed, International Journal of Solids and Structures, Vol. 18 (1982), pp. 783-789.
  44. J.R. Barber, Indentation of an elastic half space by a cooled flat punch, Quarterly Journal of Mechanics and Applied Mathematics, Vol. 35 (1982), pp. 141-154.
  45. G.M.L. Gladwell, J.R. Barber and Z. Olesiak, Thermal problems with radiation boundary conditions, Quarterly Journal of Mechanics and Applied Mathematics, Vol. 36 (1983), pp. 387-401.
  46. G.M.L. Gladwell and J.R. Barber, Thermoelastic contact problems with radiation boundary conditions, Quarterly Journal of Mechanics and Applied Mathematics, Vol. 36 (1983), pp. 403-417.
  47. J.R. Barber, The distortion of a cylinder with non-uniform axial heat conduction, Journal of Elasticity, Vol. 13 (1983), pp. 441-447.
  48. M. Comninou, J.R. Barber and J. Dundurs, Interface slip caused by a surface load moving at constant speed, International Journal of Mechanical Sciences, Vol. 25 (1983), pp. 41-46.
  49. M. Comninou and J.R. Barber, Frictional slip between a layer and a substrate due to a periodic surface force, International Journal of Solids and Structures, Vol. 19 (1983), pp. 533-539.
  50. C.J. Martin-Moran, J.R. Barber and M. Comninou, The penny-shaped interface crack with heat flow: I Perfect contact, ASME Journal of Applied Mechanics, Vol. 50 (1983), pp. 29-36.
  51. J.R. Barber and M. Comninou, The penny-shaped interface crack with heat flow: II Imperfect contact, ASME Journal of Applied Mechanics, Vol. 50 (1983), pp. 770-776.
  52. F-K. Chang, M. Comninou and J.R. Barber, Slip between a layer and a substrate caused by a normal force moving steadily over the surface, International Journal of Mechanical Sciences, Vol. 25 (1983), pp. 803-809.
  53. J.R. Barber, The solution of elasticity problems for the half-space by the method of Green and Collins, Applied Scientific Research, Vol. 40 (1983), pp. 135-157.
  54. J.R. Barber, A four-part boundary value problem in elasticity -indentation by a discontinuously concave punch, Applied Scientific Research, Vol. 40 (1983), pp. 159-167.
  55. J.R. Barber, Some polynomial solutions for the non-axisymmetric Boussinesq problem, J.Elasticity, Vol. 14 (1984), pp. 217-221.
  56. F.-K. Chang, M. Comninou, S. Sheppard, and J.R. Barber, The sub-surface crack under conditions of slip and stick caused by a surface normal force, ASME Journal of Applied Mechanics, Vol. 51 (1984), pp. 311-316.
  57. M. Comninou and J.R. Barber, The thermoelastic Hertz problem with pressure dependent contact resistance, International Journal of Mechanical Sciences, Vol. 26 (1984), pp. 549-554.
  58. J.R. Barber, Thermoelastic displacements and stresses due to a heat source moving over the surface of a half plane, ASME Journal of Applied Mechanics, Vol. 51 (1984), pp. 636-640.
  59. G.A. Berry and J.R. Barber, The division of frictional heat -A guide to the nature of sliding contact, ASME Journal of Tribology, Vol. 106 (1984), pp. 405-415.
  60. D.A. Hills and J.R. Barber, Steady motion of an insulating rigid flat-ended punch over a thermally conducting half-plane, Wear, Vol. 102 (1985), pp. 15-22.
  61. A. Azarkhin and J.R. Barber, Transient thermoelastic contact problem of two sliding half-planes, Wear, Vol. 102 (1985), pp. 1-13.
  62. S.D. Sheppard, J.R. Barber, and M. Comninou, Short subsurface cracks under conditions of slip and stick caused by a moving compressive load, ASME Journal of Applied Mechanics, Vol. 52 (1985), pp. 811-817.
  63. J.R. Barber, T.W. Beamond, J.R. Waring, and C. Pritchard, Implications of thermoelastic instability for the design of brakes, ASME Journal of Tribology, Vol. 107 (1985), pp. 206-210.
  64. A. Azarkhin and J.R. Barber, On partial contact of a thin-walled circular cylinder and a rigid half-space, International Journal of Mechanical Sciences, Vol. 27 (1985), pp. 551-557.
  65. J.R. Barber, Responses of continuous inertialess beams to traversing mass, International Journal of Mechanical Sciences, Vol. 27 (1985), pp. 693-694.
  66. J.R. Barber and N. Triantafyllidis, Effect of debonding on the stability of fiber reinforced composites, ASME Journal of Applied Mechanics, Vol. 52 (1985), pp. 235-236.
  67. J.R. Barber, Non-uniqueness and stability for heat conduction through a duplex heat exchanger tube, Journal of Thermal Stresses, Vol. 9 (1986), pp. 69-78.
  68. J.R. Barber, The influence of interface thermal contact resistance on the heat transfer performance of prestressed duplex tube, International Journal of Heat and Mass Transfer, Vol. 29 (1986), pp. 761-767.
  69. S.D. Sheppard, D.A. Hills, and J.R. Barber, An analysis offretting cracks - II: Unloading and reloading phases, International Journal of Solids and Structures, Vol. 22 (1986), pp. 387-396.
  70. D.A. Hills and J.R. Barber, Steady sliding of a circular cylinder over a dissimilar thermally conducting half-plane, International Journal of Mechanical Sciences, Vol. 28 (1986), pp. 613-622.
  71. A. Azarkhin and J.R. Barber, Thermoelastic instability for the transient contact problem of two sliding half-planes, ASME Journal of Applied Mechanics, Vol. 53 (1986), pp. 565-572.
  72. S.D. Sheppard, J.R. Barber and M. Comninou, Subsurface cracks under conditions of slip, stick and separation caused by a moving compressive load, ASME Journal of Applied Mechanics, Vol. 54 (1987), pp. 393-398.
  73. A. Azarkhin and J.R. Barber, Transient contact of two sliding half-planes with wear, ASME Journal of Tribology, Vol. 109 (1987), pp. 598-603.
  74. J.R. Barber, Thermoelastic distortion of the half-space, Journal of Thermal Stresses, Vol. 10 (1987), pp. 221-228.
  75. F.A. Sturla and J.R. Barber, Thermoelastic Green's functions for plane problems in general anisotropy, ASME Journal of Applied Mechanics, Vol. 55 (1988), pp. 245-247.
  76. A. Azarkhin and J.R. Barber, Green's functions for subsurface thermal stresses due to surface heating, Journal of Thermal Stresses, Vol. 11 (1988), pp. 1-16.
  77. J.R.Barber and Ronggang Zhang, Transient behaviour and stability for the thermoelastic contact of two rods of dissimilar materials, International Journal of Mechanical Sciences, Vol. 30 (1988), pp. 691-704.
  78. F.A. Sturla and J.R. Barber, Thermal stresses due to a plane crack in a general anisotropic material, ASME Journal of Applied Mechanics, Vol. 55 (1988), pp. 372-376.
  79. A.Azarkhin, J.R.Barber and R.L.Rolf, Combined effects of mechanical and frictionally induced thermal stresses in sliding, Key Engineering Materials, Vol. 33 (1989), pp. 135-158.
  80. J.R.Barber, An asymptotic solution for short time transient heat conduction between two similar contacting bodies, International Journal of Heat and Mass Transfer, Vol. 32 (1989), pp. 943-949.
  81. Nai-Yi Li and J.R.Barber, Sinusoidal perturbation solutions for planar solidification, International Journal of Heat and Mass Transfer, Vol. 32 (1989), pp. 935-941.
  82. Ronggang Zhang and J.R.Barber, Effect of material properties on the stability of static thermoelastic contact, ASME Journal of Applied Mechanics, Vol. 57 (1990), pp. 365-369.
  83. J.R.Barber, Contact problems for the thin elastic layer, International Journal of Mechanical Sciences, Vol. 32 (1990), pp. 129-132.
  84. J.R.Barber and D.A.Billings, An approximate solution for the contact area and elastic compliance of a smooth punch of arbitrary shape, International Journal of Mechanical Sciences, Vol. 32 (1990), pp. 991-997.
  85. J.R.Barber, Some anomalies of the curved bar problem in classical elasticity, Journal of Elasticity, Vol. 26 (1991), pp. 75-86.
  86. Nai-Yi Li and J.R.Barber, Thermoelastic instability in planar solidification, International Journal of Mechanical Sciences, Vol. 33 (1991), pp. 945-959.
  87. Taein Yeo and J.R.Barber, Stability of thermoelastic contact of a layer and a half-plane, Journal of Thermal Stresses, Vol. 14 (1991), pp. 371-388.
  88. H.G.Georgiadis, J.R.Barber and F.Ben Ammar, An asymptotic solution for short time transient heat conduction between two dissimilar contacting bodies, Quarterly Journal of Mechanics and Applied Mathematics, Vol. 44 (1991), pp. 303-322.
  89. Chongdu Cho, J.W.Holmes and J.R.Barber, Estimation of interfacial shear in ceramic composites from frictional heating measurements, Journal of the American Ceramic Society, Vol. 74 (1991), pp. 2802-2808.
  90. J.R.Barber, Generalized beam theory applied to shear stiffness, International Journal of Solids and Structures, Vol. 29 (1992), pp. 1453-1455.
  91. Xiaoping Lu, J.R.Barber and Maria Comninou, Stress concentration due to an array of hemispherical cavities at the surface of an elastic half-space, Journal of Elasticity, Vol. 28 (1992), pp. 111-122.
  92. J.R.Barber and F.A.Sturla, Application of the reciprocal theorem to some problems for the elastic half-space, Journal of the Mechanics and Physics of Solids, Vol. 40 (1992), pp. 17-25.
  93. Chongdu Cho, J.W.Holmes and J.R.Barber, Distribution of matrix cracks in a uniaxial ceramic composite, Journal of the American Ceramic Society, Vol. 75 (1992), pp. 316-324.
  94. Nai-Yi Li, L.G.Hector, Jr. and J.R.Barber, Theories of thermoelastic instability during solidification based on the Neumann temperature solution, Journal of Thermal Stresses, Vol. 15 (1992), pp. 265-293.
  95. F.Ben Ammar, M.Kaviany and J.R.Barber, Heat transfer during impact, International Journal of Heat and Mass Transfer, Vol. 35 (1992), pp. 1495-1506.
  96. H.G.Georgiadis and J.R.Barber, On the super-Rayleigh/subseismic elastodynamic indentation problem, Journal of Elasticity, Vol. 31 (1993), pp. 141-161.
  97. H.G.Georgiadis and J.R.Barber, Steady-state transonic motion of a line load over an elastic half-space (The corrected Cole/Huth solution), ASME Journal of Applied Mechanics, Vol. 60 (1993), pp. 772-774. There is a typo in this paper, corrected in Erratum
  98. D.A.Hills and J.R.Barber, Interface cracks, International Journal of Mechanical Sciences, Vol. 35 (1993), pp. 27-37.
  99. Ronggang Zhang and J.R.Barber, Transient thermoelastic contact and stability of two thin-walled cylinders, Journal of Thermal Stresses, Vol. 16 (1993), pp. 31-54.
  100. Kwangjin Lee and J.R.Barber, Frictionally-excited thermoelastic instability in automotive disk brakes, ASME Journal of Tribology, Vol. 115 (1993), pp. 607-614.
  101. Kwangjin Lee and J.R.Barber, The effect of shear tractions on frictionally-excited thermolelastic instability, Wear, Vol. 160 (1993), pp. 237-242.
  102. Faruk Yigit, Nai-Yi Li and J.R.Barber, Effect of thermal capacity on thermoelastic instability during the solidification of pure metals, Journal of Thermal Stresses, Vol. 16 (1993), pp. 285-309.
  103. Taein Yeo and J.R.Barber, Finite element analysis of thermoelastic contact stability, ASME Journal of Applied Mechanics Vol. 61 (1994), pp. 919-922.
  104. Kwangjin Lee and J.R.Barber, An experimental investigation of frictionally-excited instability in automotive disk brakes under a drag brake application, ASME Journal of Tribology, Vol. 116 (1994), pp. 409-414.
  105. Faruk Yigit and J.R.Barber, Effect of Stefan number on thermoelastic instability in unidirectional solidification, International Journal of Mechanical Sciences, Vol. 36 (1994), pp. 707-723.
  106. Kwangjin Lee and J.R.Barber, Discussion on the paper `Non-axisymmetric effects for 3D thermal analysis of a brake', A.Floquet and M.C.Dubourg, ASME Journal of Tribology, Vol. 116 (1994), pp. 407-408.
  107. Louis G. Hector, Jr., Nai-Yi Li and J.R.Barber, Strain rate relaxation effect on freezing front growth instability during planar solidification of pure metals. Part 1. Uncoupled theory, Journal of Thermal Stresses, Vol. 17 (1994), pp. 619-646.
  108. C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Acoustic Emission investigation of cold cracking in gas metal arc welding of AISI 4340 steel, Welding Journal., Vol. 74 (1995), pp. 177-s-184-s.
  109. Taein Yeo and J.R.Barber, Stability of a semi-infinite strip in thermoelastic contact with a rigid wall, International Journal of Solids and Structures, Vol. 32 (1995), pp. 553-567.
  110. Nai-Yi Li, Louis G. Hector, Jr.and J.R.Barber, Strain rate relaxation effect on freezing front growth instability during planar solidification of pure metals. Part 2. Coupled theory, Journal of Thermal Stresses, Vol. 18 (1995), pp. 69-85.
  111. Mujibur Rahman and J.R.Barber, Exact expressions for the roots of the secular equation for Rayleigh waves, ASME Journal of Applied Mechanics, Vol. 62 (1995), pp. 250-252.
  112. Jose R. Ruiz Ayala, Kwangjin Lee, Mujibur Rahman, and J.R.Barber, Effect of intermittent contact on the stability of thermoelastic sliding contact, ASME Journal of Tribology, Vol. 118 (1996), pp. 102-108.
  113. J.R.Barber, Surface Displacements due to a Steadily Moving Point Force, ASME Journal of Applied Mechanics, Vol. 63 (1996), pp. 245-251.
  114. Taein Yeo and J.R.Barber, Finite element analysis of the stability of static thermoelastic contact, Journal of Thermal Stresses, Vol. 19 (1996), pp. 169-184.
  115. C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Crack-tip equation of motion due to non-uniform residual stresses in a weldment, Welding Journal, Vol 76 (1997), pp.374-s-382-s.
  116. C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Far-field initial response of acoustic emission from cracking in a weldment, ASME Journal of Manufacturing Science and Engineering, Vol. 119 (1997), pp. 281-289.
  117. Chuan Li and J.R.Barber, Stability of thermoelastic contact of two layers of dissimilar materials, Journal of Thermal Stresses, Vol. 20 (1997), pp. 169-184.
  118. Shuqin Du, P.Zagrodzki, J.R.Barber and G.M.Hulbert, Finite element analysis of frictionally-excited thermoelastic instability, Journal of Thermal Stresses, Vol. 20 (1997), pp. 185-201.
  119. José Castillo and J.R.Barber, Contact problems involving beams, Proceedings of the Royal Society (London), Vol. A 453 (1997), pp. 2397-2412.
  120. Hanbum Cho and J.R.Barber, Dynamic behavior and stability of simple frictional systems, Mathematical and Computer Modeling, Vol. 28 (1998), pp. 37-53.
  121. Chuan Li and J.R.Barber, Thermoelastic stability of duplex heat exchanger tubes, International Journal of Mechanical Sciences, Vol. 40 (1998), pp. 575-588.
  122. N. Chawla, Y.K. Tur, J.W. Holmes, J.R. Barber, and A. Szweda, High Frequency Fatigue Behavior of Woven Fiber Fabric Reinforced Polymer-Derived Ceramic Matrix Composites, Journal of the American Ceramic Society, (1998) Vol. 81, pp. 1221-1230.
  123. D.Joachim-Ajao and J.R.Barber, Effect of material properties in certain thermoelastic contact problems, ASME Journal of Applied Mechanics, Vol. 65 (1998), pp.889-893.
  124. Nadine Audebert, J.R.Barber and P.Zagrodzki, Buckling of automatic transmission clutch plates due to thermoelastic/plastic residual stresses, Journal of Thermal Stresses, Vol. 21 (1998), pp. 309-326.
  125. M. J. Leamy, J. R. Barber and N. C. Perkins, Distortion of a harmonic elastic wave reflected from a dry frictional support, ASME Journal of Applied Mechanics, Vol. 65 (1998), pp. 851-857.
  126. Yong Hoon Jang, J. R. Barber and S. Jack Hu, Electrical conductance between dissimilar materials with temperature-dependent properties, Journal of Physics D Applied Physics, Vol 31 (1998), pp. 3197-3205.
  127. Hanbum Cho and J. R. Barber, Stability of the three-dimensional Coulomb friction law, Proceedings of the Royal Society (London), Vol. A 455 (1999), pp. 839-861.
  128. Yun-Bo Yi, Shuqin Du, J. R. Barber and J. W. Fash, Effect of geometry on thermoelastic instability in disk brakes and clutches, ASME Journal of Tribology, Vol. 121 (1999), pp. 661-666.
  129. J. R. Barber and L. G. Hector, Thermoelastic contact problems for the layer, ASME Journal of Applied Mechanics, Vol. 66 (1999), pp. 806-809.
  130. J.R.Barber, Thermoelasticity and contact, Journal of Thermal Stresses, Vol. 22 (1999), pp. 513-525.
  131. J.R.Barber and M.Ciavarella, Contact Mechanics, in Research Trends in Solid Mechanics, (ed. G. Dvorak), International Journal of Solids and Structures, Vol.37 (2000), pp.29-43.
  132. M.Ciavarella, G.Demelio, J.R.Barber and Yong Hoon Jang, Linear elastic contact of the Weierstrass profile, Proceedings of the Royal Society (London), Vol. A 456 (2000), pp. 387-405.
  133. Yun-Bo Yi, J.R.Barber and P.Zagrodzki, Eigenvalue Solution of Thermoelastic Instability Problems using Fourier Reduction, Proceedings of the Royal Society (London), Vol. A 456 (2000), pp. 2799-2821.
  134. P.Zagrodzki, K.B.Lam, E.Al-Bahkali and J.R.Barber, Nonlinear transient behaviour of a sliding system with frictionally excited thermoelastic instability, ASME Journal of Tribology, Vol. 123 (2001), pp. 699-708.
  135. Fotini V.Katopodes, J.R.Barber and Yansong Shan, Torsional deformation of an endoscope probe, Proceedings of the Royal Society (London), Vol. A 457 (2001), pp. 2491-2506.
  136. Shiqing Fan and J.R.Barber, Solution of periodic heating problems by the transfer matrix method, International Journal of Heat and Mass Transfer, Vol 45 (2002), pp.1155-1158.
  137. A.Sackfield, J.R.Barber, D.A. Hills and C.E.Truman, A shrink-fit shaft subject to torsion, European Journal of Mechanics A-Solid, Vol.21 (2002), pp.73-84.
  138. Abdullah Al-Shabibi and J.R.Barber, Transient solution of a two-dimensional TEI problem using a reduced order model, International Journal of Mechanical Sciences, Vol.44 (2002), pp.451-464.
  139. J.R.Barber, K.Grosh and Sejoong Oh, Energy considerations in systems with varying stiffness, ASME Journal of Applied Mechanics, Vol.70 (2003), pp.465--469.
  140. J.R.Barber, Bounds on the electrical resistance between contacting elastic rough bodies, Proceedings of the Royal Society (London), Vol. A 459 (2003), pp. 53-66.
  141. A.Sackfield, A.Mugadu, J.R.Barber and D.A.Hills, The application of asymptotic solutions to characterising the process zone in almost complete frictionless contacts, Journal of the Mechanics and Physics of Solids, Vol. 51 (2003), pp.1333--1346.
  142. J.J.Vlassak, M.Ciavarella, J.R.Barber and X.Wang, The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape, Journal of the Mechanics and Physics of Solids, Vol. 51 (2003), pp.1701--1721.
  143. M.Ciavarella, L. Johansson, L.Afferrante, A.Klarbring and J.R.Barber, Interaction of thermal contact resistance and frictional heating in thermoelastic instability, International Journal of Solids and Structures, Vol 40 (2003), pp. 5583--5597.
  144. Yong Hoon Jang and J.R.Barber, Effect of contact statistics on electrical contact resistance, Journal of Applied Physics, Vol 94 (2003) , pp.7215--7221.
  145. A.Mugadu, D.A.Hills, J.R.Barber and A.Sackfield, The application of asymptotic solutions to characterising the process zone in almost complete frictional contacts, International Journal of Solids and Structures, Vol.41 (2004), pp.385-397.
  146. M.Ciavarella, G. Murolo, G.Demelio and J. R. Barber, Elastic contact stiffness and contact resistance for the Weierstrass profile, Journal of the Mechanics and Physics of Solids, Vol. 52 (2004), pp 1247-1265.
  147. J.R.Barber, Stresses in a half space due to Newtonian gravitation, Journal of Elasticity, Vol.75 (2004) pp.187--192.
  148. M.Ciavarella and J. R. Barber, Stability of thermoelastic contact for a rectangular elastic block sliding against a rigid wall, European Journal of Mechanics A (Solids), Vol.24 (2005), pp.371--376.
  149. Melida Chin, J.R.Barber and S.J.Hu, Effect of elastic recovery on the electrical contact resistance in anisotropic conductive adhesive assemblies, IEEE Transactions on Components and Packaging Technologies, Vol.29 (2006), pp.137--144.
  150. Jon Kadish, J.R.Barber and P.D.Washabaugh, Stresses in rotating spheres grown by accretion, International Journal of Solids and Structures, Vol 42 (2005), pp. 5322-5334.
  151. M.Upmanyu and J.R.Barber, Interrupted tubules in filamentous crystals: Elastic analysis, Physical Review B, Vol.72 (2005): Art. No. 205442.
  152. Luciano Afferante, M.Ciavarella and J.R.Barber, Sliding thermoelastodynamic instability, Proceedings of the Royal Society (London), Vol.462 (2006), pp.2161--2176.
  153. Sejoong Oh, Karl Grosh and J.R.Barber, Energy conserving equations of motion for gear systems, ASME Journal of Vibration and Acoustics, Vol.127 (2005), pp.208--212.
  154. E.A.Al-Bahkali and J.R.Barber, Nonlinear steady state solution for a thermoelastic sliding system using finite element method, Journal of Thermal Stresses, Vol.29 (2006), pp.153--168.
  155. J.R.Barber, Three-dimensional elasticity problems for the prismatic bar Proceedings of the Royal Society (London), Vol.462 (2006), pp.1877--1896.
  156. Donghee Lee and J.R.Barber, An automated procedure for determining asymptotic elastic fields at singular points, Journal of Strain Analysis, Vol.41 (2006), pp.287--295.
  157. M.Ciavarella, A.Baldini, J.R.Barber and A.Strozzi, Reduced dependence on loading parameters in almost conforming contacts, International Journal of Mechanical Sciences, Vol. 48 (2006), pp. 917--925.
  158. J.R.Barber, Three-dimensional elasticity solutions for isotropic and generally anisotropic bodies, Applied Mechanics and Materials, Vols. 5-6 (2006) pp. 541-550.
  159. J.R.Barber and T.C.T.Ting, Three-dimensional solutions for general anisotropy, Journal of the Mechanics and Physics of Solids, Vol.55 (2007), pp. 1993--2006.
  160. A.Klarbring, M.Ciavarella and J.R.Barber, Shakedown in elastic contact problems with Coulomb friction, International Journal of Solids and Structures, Vol.44 (2007), pp.8355--8365.
  161. Jon Kadish, J.R.Barber, P.D.Washabaugh and D.J.Scheeres, Stresses in accreted planetary bodies, International Journal of Solids and Structures, Vol.45 (2008), pp.540--550.
  162. Jon Kadish, Esteban Rougier, Ante Munjiza and J.R.Barber, Granular temperature as an energy dissipation mechanism in bodies of the Solar System, Proceedings of the Royal Society (London), Vol.463 (2007), pp.2485--2493.
  163. J.R.Barber, A.Klarbring and M.Ciavarella, Shakedown in frictional contact problems for the continuum, Comptes Rendus Mecanique , Vol.336 (2008), pp.34--41.
  164. Jiayin Li and J.R.Barber, Solution of transient thermoelastic contact problems by the fast speed expansion method, Wear, Vol.265 (2008), pp.402--410.
  165. Donghee Lee, N.Triantafyllidis, J.R.Barber and M.D.Thouless, Surface instability of an elastic half space with material properties varying with depth, Journal of the Mechanics and Physics of Solids, Vol.56 (2008), pp.858--868.
  166. Melida Chin, S.J.Hu, and J.R.Barber, Design guidelines for anisotropic conductive adhesive assemblies in microelectronics packaging, ASME Journal of Electronic Packaging, Vol.130 (2008), Issue: 2 Article Number: 021006.
  167. Young Ju Ahn and J.R.Barber, Response of frictional receding contact problems to cyclic loading, International Journal of Mechanical Sciences, Vol.50 (2008), pp.1519--1525.
  168. M.Ciavarella and J.R.Barber, Influence of longitudinal creepage and wheel inertia on short pitch corrugation: A resonance-free mechanism to explain the roaring rails pheonomenon, Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol.222 (2008), pp.171--181.
  169. D. Dini, J.R. Barber, C.M. Churchman, A. Sackfield and D.A. Hills, The application of asymptotic solutions to contact problems characterised by logarithmic singularities, European Journal of Mechanics A-Solids, Vol.27 (2008), pp.847--858.
  170. J.R.Barber, M.Ciavarella, L.Afferrante and A.Sackfield, Effect of small harmonic oscillations during the steady rolling of a cylinder on a plane, International Journal of Mechanical Sciences, Vol.50 (2008), pp.1344-1353.
  171. Young Ju Ahn, Enrico Bertocchi, J.R.Barber, Shakedown of coupled two-dimensional discrete frictional systems, Journal of the Mechanics and Physics of Solids, Vol.56 (2008), pp.3433--3440.
  172. Abdullah Al-Shabibi and J.R.Barber, Transient solution of the unperturbed thermoelastic contact problem, Journal of Thermal Stresses, Vol. 32 (2009), pp. 226--243.
  173. Donghee Lee, J.R.Barber and M.D.Thouless, Indentation of an elastic half space with material properties varying with depth, International Journal of Engineering Science, Vol.47 (2009), pp.1274--1283.
  174. J.R.Barber, Letter to the Editor concerning ``On the torsion of a prism with non-equilateral triangular cross-section,'' by L.M.B.C. Campos and F.S.R.P. Cunha, International Journal of Engineering Science, Vol. 48 (2010), p.2107.
  175. Yong Hoon Jang, Hanbum Cho and J.R.Barber, The thermoelastic Hertzian contact problem, International Journal of Solids and Structures, Vol.46 (2009), pp.4073--4078.
  176. R.J.H.Paynter, D.A.Hills and J.R.Barber, Features of the stress field at the surface of a flush shrink-fit shaft, Journal of Mechanical Engineering Science, Vol.223 (2009), pp.2241--2247.
  177. Yong Hoon Jang and J.R.Barber, Multiscale analysis of moving clusters of microcontacts, International Journal of Heat and Mass Transfer, Vol.53 (2010), pp.3817-3822.
  178. M.Kartal, D.A.Hills, D.Nowell and J.R.Barber, Torsional contact between elastically similar flat-ended cylinders, International Journal of Solids and Structures, Vol.47 (2010), pp.1375--1380.
  179. M.E.Kartal, J.R.Barber, D.A.Hills and D.Nowell, Partial slip problem for two semi-infinite strips, International Journal of Engineering Science, Vol. 49 (2011), pp.203--211.
  180. Yong Hoon Jang and J.R.Barber, Frictional energy dissipation in materials containing cracks, Journal of the Mechanics and Physics of Solids, Vol. 59 (2011), pp.583--594.
  181. Yong Hoon Jang and J.R.Barber, Effect of phase on the frictional dissipation in systems subjected to harmonically varying loads, European Journal of Mechanics A/Solids, Vol.30 (2011), pp.269--274.
  182. V. V. Meleshko, Yu. V. Tokovyi, and J. R. Barber, Axially symmetric temperature stresses in an elastic isotropic cylinder of finite length, Journal of Mathematical Sciences, Vol.172 (2011), pp.1--25.
  183. J.R.Barber, M.Davies and D.A.Hills, Frictional elastic contact with periodic loading, International Journal of Solids and Structures, Vol.48 (2011), pp.2041--2047.
  184. M.Paggi and J.R.Barber, Contact conductance of rough surfaces composed of modified RMD patches, International Journal of Heat and Mass Transfer, Vol.54 (2011), pp.4664--4672.doi: 10.1016/j.ijheatmasstransfer.2011.06.011
  185. D.A.Hills, M.Davies and J.R.Barber, An incremental formulation for half-plane contact problems subject to varying normal load, shear and tension, Journal of Strain Analysis, Vol.46 (2011), pp.436-443.doi: 10.1177/0309324711405404
  186. J.R.Barber, Frictional systems subjected to oscillating loads, Annals of Solid and Structural Mechanics, Vol.2 (2011), pp.45--55.
  187. C.Putignano, M.Ciavarella and J.R.Barber, Frictional energy dissipation in contact of nominally flat rough surfaces under harmonically varying loads , Journal of the Mechanics and Physics of Solids, Vol. 59 (2011), pp.2442-2454.doi: 10.1016/j.jmps.2011.09.005
  188. M.Davies, J.R.Barber and D.A Hills, Energy dissipation in a frictional incomplete contact with varying normal load, International Journal of Mechanical Sciences, Vol.55 (2012), pp.13-21, doi: 10.1016/j.ijmecsci.2011.11.006
  189. A.Al-Shabibi and J.R.Barber, Finite element implementation of the eigenfunction series solution for transient heat conduction problems with low Biot number, Journal of Mechanical Engineering Science, Vol.226 (2012), pp.1579--1588, doi: 10.1177/0954406211423615
  190. J.A.Greenwood and J.R.Barber, Indentation of an elastic layer by a rigid cylinder, International Journal of Solids and Structures, Vol.49 (2012), pp.2962--2977. doi: 10.1016/j.ijsolstr.2012.05.036 There is a serious typo in this paper, corrected in Corrigendum
  191. D.A.Hills, A.Thaitirarot, J.R.Barber, and D.Dini, Correlation of fretting fatigue experimental results using an asymptotic approach, International Journal of Fatigue, Vol. 43 (2012) pp. 62–75. doi: 10.1016/j.ijfatigue.2012.02.006
  192. J.R.Barber, Incremental stiffness and electrical contact conductance in the contact of rough finite bodies, Physical Review E, Vol. 87 (2013), Art. 013203.doi: 10.1103/PhysRevE.87.013203
  193. J.R.Barber, Multiscale surfaces and Amontons' law of friction, Tribology Letters, Vol. 49 (2013), pp.539--543. doi: 10.1007/s11249-012-0094-6
  194. L-E.Andersson, J.R.Barber and Y-J Ahn, Attractors in frictional systems subjected to periodic loads, SIAM Journal of Applied Mathematics, Vol.73 (2013), pp.1097--1116. doi: 10.1137/120885024
  195. J.R.Barber, Similarity considerations in adhesive contact problems, Tribology International, Vol.67 (2013), pp.51--53. doi: 10.1016/j.triboint.2013.06.019
  196. Yuwei Liu, Yong Hoon Jang and J. R. Barber, Finite element implementation of an eigenfunction solution for the contact pressure variation due to wear, Wear, Vol. 309 (2014), pp. 134--138. doi: 10.1016/j.wear.2013.11.004
  197. J. R. Barber and M.Ciavarella, JKR solution for an anisotropic half space, Journal of the Mechanics and Physics of Solids, Vol. 64 (2014), pp.367--376. doi: 10.1016/j.jmps.2013.12.002
  198. A.Thaitirarot, R.Flicek, D.A.Hills, and J.R.Barber, The use of static reduction in the solution of two-dimensional frictional contact problems, Journal of Mechanical Engineering Science, Vol. 228 (2014), pp. 1474--1487. doi: 10.1177/0954406213509086
  199. Yuwei Liu and J. R. Barber, Transient heat conduction between rough sliding surfaces, Tribology Letters, Vol. 55 (2014), pp. 23--33. doi: 10.1007/s11249-014-0328-x
  200. Xiaosun Wang and J.R.Barber, Numerical algorithms for two-dimensional dynamic frictional problems, Tribology International, Vol. 80 (2014), pp. 141--146 doi: 10.1016/j.triboint.2014.07.004
  201. L-E. Andersson, J. R. Barber and A. R. S. Ponter, Existence and uniqueness of attractors in frictional systems with uncoupled tangential displacements and normal tractions, International Journal of Solids and Structures, Vol. 51 (2014), pp. 3710--3714.doi: 10.1016/j.ijsolstr.2014.07.004
  202. Jae Hyung Kim, Young Ju Ahn, Yong Hoon Jang and J. R. Barber, Contact problems involving beams, International Journal of Solids and Structures, Vol. 51 (2014), pp. 4435--4439. doi: 10.1016/j.ijsolstr.2014.09.013
  203. R. C. Flicek, D. A. Hills, J. R. Barber, and D. Dini, Determination of the shakedown limit for large, discrete frictional systems, European Journal of Mechanics A/Solids, Vol. 49 (2015), pp. 242--250.doi: 10.1016/j.euromechsol.2014.08.001
  204. Zupan Hu, Wei Lu, M. D. Thouless and J. R. Barber, Simulation of wear evolution using fictitious thermal expansion, Tribology International, Vol. 82 (2015), pp. 191--194.doi: 10.1016/j.triboint.2014.10.015
  205. A. Papangelo, M. Ciavarella and J.R.Barber, Fracture Mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws, Proceedings of the Royal Society of London, Vol. A 471 (2015) Issue: 2180 Article Number: 20150271.doi: 10.1098/rspa.2015.0271
  206. R. Fleury, D. A. Hills and J. R. Barber, A corrective solution for finding the effects of edge-rounding on complete contact between elastically similar bodies. Part I: Contact law and normal contact considerations, International Journal of Solids and Structures, Vol. 85--86 (2016), pp. 89--96. doi: 10.1016/j.ijsolstr.2015.11.031
  207. R. Fleury, D. A. Hills and J. R. Barber, A corrective solution for finding the effects of edge-rounding on complete contact between elastically similar bodies. Part II: Near-edge asymptotes and the effect of shear, International Journal of Solids and Structures, Vol. 85--86 (2016), pp. 97--104. doi: 10.1016/j.ijsolstr.2015.11.032
  208. Yongwoo Lee, Yuwei Liu, J.R.Barber and Yong Hoon Jang, Thermal considerations during transient asperity contact, Tribology International, Vol. 94 (2016), pp. 87--91. doi: 10.1016/j.triboint.2015.08.008
  209. Yongwoo Lee, Yuwei Liu, J.R.Barber and Yong Hoon Jang, Thermal boundary conditions in sliding contact problem, Tribology International, Vol. 103 (2016), pp. 69--72. doi: 10.1016/j.triboint.2016.06.028
  210. J. R. Barber, Nominally static frictional contacts under periodic loading, Journal of Strain Analysis, Vol. 51 (2016), pp. 270-278. doi: 10.1177/0309324715602844
  211. Zupan Hu, Wei Lu, M. D. Thouless and J. R. Barber, Effect of plastic deformation on the evolution of wear and local stress fields in fretting, International Journal of Solids and Structures, Vol. 82 (2016), pp. 1--8. doi: 10.1016/j.ijsolstr.2015.12.031
  212. Xiaosun Wang and J. R. Barber, Numerical frictional algorithm with implementation of closed form analytical solutions, Computer Methods in Applied Mechanics and Engineering, Vol. 300 (2016), pp. 643--656. doi: 10.1016/j.cma.2015.12.001
  213. J. R. Ockendon and J. R. Barber, A model for thermoelastic contact oscillations, IMA Journal of Applied Mathematics, Vol. 81 (2016), pp. 679-687. doi: 10.1093/imamat/hxw002
  214. H. Wang, W. Lu, J. R. Barber and M. D. Thouless, The roles of cohesive strength and toughness for crack growth in visco-elastic and creeping materials, Engineering Fracture Mechanics, Vol. 160 (2016), pp. 226--237.doi: 10.1016/j.engfracmech.2016.04.026
  215. M. Ciavarella, J.A. Greenwood and J.R. Barber, Effect of Tabor parameter on hysteresis losses during adhesive contact, Journal of the Mechanics and Physics of Solids, Vol. 98 (2017), pp. 236--244. doi: 10.1016/j.jmps.2016.10.005
  216. A. Klarbring, J. R. Barber, A. Spagnoli and M. Terzano, Shakedown of discrete systems involving plasticity and friction, European Journal of Mechanics / A Solids, Vol. 64 (2017) pp. 160--164.doi: 10.1016/j.euromechsol.2017.02.006
  217. J. Joe, M. Scaraggi and J. R. Barber, Effect of fine-scale roughness on the tractions between contacting bodies, Tribology International, Vol. 111 (2017), pp. 52--56. doi: 10.1016/j.triboint.2017.03.001
  218. D. A. Hills, D. Nowell and J. R. Barber, K. L. Johnson and contact mechanics, Journal of Mechanical Engineering Science, Vol. 231 (2017) (13) pp. 2451-2458. doi: 10.1177/0954406216634121
  219. Huihui Hong, Liang Han, N. C. Perkins, Chuan Hu and J. R. Barber, Nonlinear membrane stiffness model of a tennis racquet string bed, Journal of Sports Engineering and Technology, Vol 232 (2018), pp. 57--65. doi: 10.1177/1754337117723762
  220. R. M. N. Fleury, D. A. Hills, R. Ramesh and J. R. Barber, Incomplete contacts in partial slip subject to varying normal and shear loading, and their representation by asymptotes, Journal of the Mechanics and Physics of Solids, Vol. 99 (2017), pp. 178--191. doi: 10.1016/j.jmps.2016.11.016
  221. R. Ramesh, J. R. Barber and D. A. Hills, Plane incomplete contact problems subject to bulk stress with a varying normal load, International Journal of Mechanical Science, Vol. 122 (2017), pp. 228--234.doi: 10.1016/j.ijmecsci.2017.01.032
  222. A. Spagnoli, M. Terzano, J. R. Barber and A. Klarbring, Non-linear programming in shakedown analysis with plasticity and friction, Journal of the Mechanics and Physics of Solids, Vol. 104 (2017), pp. 71--83. doi: 10.1016/j.jmps.2017.04.006
  223. M. R. Moore, R. Ramesh, D. A. Hills and J. R. Barber, Half-plane partial slip contact problems with a constant normal load, subject to both a shear force and differential bulk tension, Journal of the Mechanics and Physics of Solids, Vol.118 (2018), pp. 245--253.doi: 10.1016/j.jmps.2018.05.017
  224. J. Joe, M. D. Thouless and J. R. Barber, Effect of roughness on the adhesive tractions between contacting bodies, Journal of the Mechanics and Physics of Solids, Vol. 118 (2018), pp. 365--373. doi: 10.1016/j.jmps.2018.06.005
  225. K. Hong, J. R. Barber, M. D. Thouless and W. Lu, Cracking and spalling of the oxide layer developed in high-burnup Zircaloy-4 fuel rods under normal oper- ating conditions in a PWR, Journal of Nuclear Materials, Vol. 512 (2018), pp. 46--55. doi: 10.1016/j.jnucmat.2018.10.003
  226. P. D. Howell, J. R. Barber and J. R. Ockendon, Multiple-contact thermoelastic oscillations, Journal of Thermal Stresses, Vol. 41 (2018), pp. 1329--1345. doi: 10.1080/01495739.2018.1487268
  227. R. Ramesh, D. A. Hills, J. R. Barber and M. R. Moore, Methods to solve half-plane partial slip contact problems, International Journal of Solids and Structures, Vol. 155 (2018), pp. 155--159. doi: 10.1016/j.ijsolstr.2018.07.019
  228. K. Hong, M. D. Thouless, W. Lu, and J. R. Barber, Asymptotic stress fields for complete contact between dissimilar materials, ASME Journal of Applied Mechanics, Vol 86(1) (2018) 011009 Paper No: JAM-18-1488; doi: 10.1115/1.4041618
  229. M. Ciavarella, J. Joe, A. Papangelo and J. R. Barber, The role of adhesion in contact mechanics, Journal of the Royal Society Interface, Vol. 16 (2019), Art. 20180738. doi: 10.1098/rsif.2018.0738
  230. K. Hong, W. Lu, M. D. Thouless, and J. R. Barber, Corner stress fields in sliding at high friction coefficients, European Journal of Mechanics A-Solids, Vol. 76 (2019), pp. 308--311. doi: 10.1016/j.euromechsol.2019.04.018
  231. D. Wang, M. D. Thouless, W. Lu and J. R. Barber, In-situ observations of abrasion mechanisms of nonwoven fabric, Wear, Vol 432--433 (2019) 202945. doi: 10.1016/j.wear.2019.202945
  232. S. Kim, Y. H. Jang and J. R. Barber, Wedging of frictional elastic systems, Facta Universitatis, Mechanical Engineering, Vol. 17 (2019), pp. 141--148. doi: 10.22190/FUME190131019K
  233. K. Hong, J. R. Barber, M. D. Thouless and W. Lu, Cracking of Cr-coated accident-tolerant fuel during normal operation and under power-ramping conditions, Nuclear Engineering and Design, Vol. 353 (2019), 110275.doi: 10.1016/j.nucengdes.2019.110275
  234. D. Wang, J. R. Barber, W. Lu and M. D. Thouless, Use of wavelet analysis for an objective evaluation of the formation of pills in nonwoven fabrics, Journal of Industrial Textiles, Vol. 49(5) (2019), pp. 663--675.doi: 10.1177/1528083718813524
  235. I. Gupta, J. R. Barber, M. D. Thouless, and W. Lu, Mechanistic model for stresses in the oxide layer formed on zirconium alloys, Journal of Thermal Stresses, Vol. 42 (2019), pp.1071--1082.doi: 10.1016/j.ijsolstr.2019.03.025
  236. H. Andresen, D. A. Hills, J. R. Barber and J. Vazquez, Frictional half-plane contact problems subject to alternating normal and shear loads and tension in the steady state, International Journal of Solids and Structures, Vol. 168 (2019), pp. 166--171.doi: 10.1016/j.ijsolstr.2019.03.025
  237. M. Ciavarella, A. Papangelo and J. R. Barber, Effect of wear on the evolution of contact pressure at a bimaterial sliding interface, Tribology Letters, Vol. 68 (2020), Art. 27.\\ doi: 10.1007/s11249-020-1269-1
  238. Dandan Wang, M. D. Thouless, Wei Lu and J. R. Barber, Generation of perversions in fibers with intrinsic curvature, Journal of the Mathematics and Physics of Solids, Vol. 139 (2020), 103932.doi: 10.1016/j.jmps.2020.103932
  239. Junki Joe, M. D. Thouless and J. R. Barber, Effect of surface roughness on adhesive instabilities for the elastic layer, Frontiers in Mechanical Engineering, Vol. 6 (2020), Art. 31. doi: 10.3389/fmech.2020.00031
  240. H. Andresen, D. A. Hills, J. R. Barber and J. Vazquez, Steady state cyclic behaviour of a half-plane contact in partial slip subject to varying normal load, moment, shear load, and moderate differential bulk tension, International Journal of Solids and Structures, Vol. 182--183 (2020), pp. 156--161.doi: 10.1016/j.ijsolstr.2019.07.027
  241. Isha Gupta, J. R. Barber, M. D. Thouless and Wei Lu, Influence of the Turing instability on the motion of domain boundaries, Physical Review E, Vol. 102(1), Art. 012802.doi: 10.1103/PhysRevE.102.012802
  242. K. Hong, J. R. Barber, M. D. Thouless and W. Lu, Effect of power history on pellet-cladding interaction, Nuclear Engineering and Design, Vol. 358 (2020), Art. 110439.doi: 10.1016/j.nucengdes.2019.110439
  243. A. Spagnoli, G. Beccarelli, M. Terzano, J. R. Barber, A numerical study on frictional shakedown in large-scale three-dimensional conforming elastic contacts, International Journal of Solids and Structures, Vol. 217 (2021), pp. 1--14. doi: 10.1016/j.ijsolstr.2021.01.024
  244. J. Joe, J. R. Barber and B. Raeymaekers, A general load-displacement relationship between random rough surfaces in elastic, non-adhesive contact, with application in metal additive manufacturing, Tribology Letters, Vol 70 (2022), Art 77. doi: 10.1007/s11249-022-01618-y
  245. M. Ciavarella L. Romano and J. R. Barber, Rolling of a cylinder with slip-dependent friction: the Carter solution revisited, Theoretical and Applied Fracture Mechanics, Vol. 121 (2022), Art. 103468. doi: 10.1016/j.tafmec.2022.103468
  246. N. Cwiekala, J. R. Barber and D. A. Hills, Memory-free loading paths for a coupled continuous contact problem with friction, Mechanics Research Communications, Vol. 124 (2022), Art. 103958. doi: 10.1016/j.mechrescom.2022.103958
  247. N. Cwiekala, J. R. Barber and D. A. Hills, Frictional shakedown of a coupled continuous contact, International Journal of Solids and Structures, Vol. 274 (2023), Art. 112293. doi: 10.1016/j.ijsolstr.2023.112293

Papers in Conference Proceedings

  1. J.R. Barber, Thermoelastic contact problems in A.I.de Pater and J.J. Kalker, eds., The mechanics of the contact between deformable bodies, Delft Univ. Press, (1975), pp. 177-190.
  2. A. Azarkhin and J.R. Barber, Stability of a long cylindrical shell with partial contact at the end face, in A. P. S. Selvadurai and G. Voyiadjis, eds., Mechanics of Materials Interfaces, Elsevier, Amsterdam, (1986), pp. 143--154.
  3. J.R. Barber, R.A. Volz, R. Desai, R. Rubenfeld, B. Schipper, and J. Wolter, Automatic two-fingered grip selection, Proc. IEEE International Conference on Robotics and Automation, San Francisco, CA, (1986).
  4. J.R. Barber, Thermal effects in elastic contact, in G.M.L.Gladwell, H. Ghonem, J. Kalousek, eds., Contact mechanics and wear of rail/wheel systems II, University of Waterloo Press (1987), pp. 41--57.
  5. J.R. Barber and M. Comninou, Thermoelastic effects in fracture, in Y.D.Bui and Q.S. Nguyen, eds., Thermomechanical couplings in solids, Elsevier, Lausanne, (1987), pp. 95--103.
  6. J.R. Barber, Stability of thermoelastic contact, Institution of Mechanical Engineers, International Conference on Tribology, London (1987), pp. 981-986.
  7. J.R.Barber, F.Ben Ammar and H.G.Georgiadis, Conductive heat exchange between bodies which are in contact for a very short period of time, Collected papers in Heat Transfer, ASME (1989), pp. 101--106.
  8. Nai-Yi Li and J.R.Barber, Residual stresses in castings with axisymmetric solidification, Transport Phenomena in Manufacturing, ASME (1989), pp. 27--34.
  9. J.R.Barber, Is modelling in tribology a useful activity?, in Tribological modeling for mechanical designers, ASTM STP 1105, K.C.Ludema, R.G.Bayer, P.J.Blau and W.Littman, eds., ASTM, Philadelphia, (1991), pp. 165--172.
  10. F.Ben Ammar, M.Kaviany and J.R.Barber, Heat transfer during impact, Proc. Joint JSMA/ASME Heat Transfer Conference, Reno NV, March 1991, Vol. 4, pp. 481--492.
  11. N-Y. Li, L.G.Hector, Jr. and J.R.Barber, Theories of growth instability during soldification of metals: Part II, Stress function approach, Int. Conf Transport phenomena in processing, Hawaii, (1992).
  12. H.G.Georgiadis and J.R.Barber, On the super-Rayleigh/subseismic elastodynamic indentation problem, Proc. 3rd. Greek Conference on Mechanics, Athens, June 1992.
  13. Faruk Yigit and J.R.Barber, Effect of thermal capacity on the development of sinusoidal perturbations during the unidirectional solidification of pure metals, ASME Winter Annual Meeting, 1992, Anaheim, CA.
  14. J.R.Barber, Instability of unidirectional solidification due to pressure-dependent thermal contact resistance at the mould/casting interface, Contact Mechanics International Symposium, Lausanne, Switzerland, October 1992, pp. 71--89.
  15. C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Crack-tip equation of motion due to non-uniform residual stresses in a weldment, Proceedings of the First S. M. Wu Symposium on Manufacturing Science, Northwestern University, Evanston, Il., May 27-28, 1994, pp. 261--268.
  16. Kwangjin Lee and J.R.Barber, The effect of intermittent contact on the thermoelastic instability of automotive brake systems, ASME Applied Mechanics and Materials Summer Meeting, UCLA, June 1995.
  17. Yong Hoon Jang and J.R.Barber, Transient thermoelastic contact problems for an elastic foundation, Third Asian Pacific Conference on Computational Mechanics (APCOM '96), Seoul, S.Korea, September 1996.
  18. Shuqin Du, P.Zagrodzki, J.R.Barber and G.M.Hulbert, Thermoelastic instabilities in brakes and clutches, Thermal Stresses '97, Rochester, NY, June 1997, pp.393--396.
  19. J.R.Barber, Thermoelastic instabilities in brakes and clutches, XXVI National Conference of the Italian Association for Stress Analysis (AIAS '97), Catania, Sicily, September 1997.
  20. J.R.Barber, Thermoelasticity and contact, Thermal Stresses '99, Cracow, Poland, (1999).
  21. P.Zagrodzki, K.B.Lam, E.Al-Bahkali and J.R.Barber, Simulation of a sliding system with frictionally-excited thermoelastic instability, Thermal Stresses '99, Cracow, Poland, (1999).
  22. Elizabeth T. Smith, William W.Schultz, James R. Barber and Elijah Kannatey-Asibu, Jr., Modeling laser weld pool oscillations subject to various edge constraints. Proc. 3rd ASME/JSME Joint Fluids Engineering Conference, San Francisco, CA, July 1999.
  23. Sejoong Oh, Karl Grosh and James R. Barber, Dynamic stability analysis of spur gears in a steady state, Proc. DETC'99, ASME, Nashville, TN, November 1999.
  24. Abdullah Al-Shabibi and J.R.Barber, Transient solution of 2-D TEI problem using reduced order models, in Transmission and Driveline System Symposium 2001 (SP-1598), SAE.
  25. J.R.Barber, Bounds on the thermal and electrical resistance between contacting elastic rough bodies, Thermal Stresses 2003, VPI, Blacksburg, VA, (2003).
  26. E.A.Al-Bahkali and J.R.Barber, A steady state solution for a sliding system with frictionally excited thermoelastic instability, Thermal Stresses 2003, VPI, Blacksburg, VA, (2003).
  27. Jiayin Li and J.R.Barber, Transient solution of the inhomogeneous thermoelastic contact problem using fast speed expansion, Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.
  28. J.R.Barber, M.Ciavarella and L.Afferante, Influence of thermal contact resistance on frictionally-excited thermoelastic instability (TEI), Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.
  29. J.R.Barber and P.Hild, Non-uniqueness, eigenvalue solutions and wedged configurations involving Coulomb friction, Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.
  30. M.Ciavarella, C.Murolo, W.Manners and J.R.Barber, Persson's theory of elastic contact of rough surfaces applied to random profiles with a dominant wavelength, Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.

Software

  1. Yun-Bo Yi and J.R.Barber, HotSpotter, A windows-based software package for estimating the susceptibility of brake and clutch systems to thermoelastic instability.