1. Moon-Soo Na, Optimal Shape Remodeling of Elastic Bodies by the Finite Element Method, 1982, Co-Chair with J.E. Taylor, ( Technical Director, Defence Research Institute, Korea )
  2. David J. Benson, The Simulation of Deformable Mechanical Systems using Vector Processors, 1983, Co-Chair with M. Chase, ( Professor, Department of Mechanical Engineering, University of california at San Diego )
  3. Jung-Ho Cheng, Finite Element Simulations of Metal Forming Processes by Large Deformation Thermo-Elasto-Plastic Formulations with Grid Adaptive and Mesh Rezoning Methods, 1985, Chair, ( Associate Professor, Department of Mechanical Engineering, National Taiwan University, Taiwan )
  4. Kyoon-Yang Chung, Shape Optimization and Free Boundary Problems with Grid Adaptation, 1985, Co-Chair with J.E. Taylor, ( Technical Director, Maritintime Research Institute, Hyundai Heavy Industries, Korea )
  5. Abdel-Rahim A Jallad, Adaptive Moving Finite-Element Simulation for the Temperature Distribution in Arc-Welding Process, 1986, Co-Chair with Kanathy-Ashibu, ( Associate Professor, Department of Mechanical Engineering, University of Jordan )
  6. Carlos A.D.C. Selke, Local Unilateral Contact Problems of Beams and Plates Undergoing Large Deflections,1986, Chair, ( Director for International Program, C.N.P.Q., Brasilia D.F., Brazil )
  7. Ernest, Ekenem Nweke, Design of Composite StructuresInvolving Contact Phenomena, May 1986, Co-Chair with R.A. Scott.
  8. Myung S. Lee, Shape Optimization of A Hole in Symmetric Laminates, 1987, Co-Chair with R.A. Scott. ( Director, Vehicle Analysis Research Group, R & D Division, Daewoo Motor, Korea )
  9. David Beale, A Study of the Motion of a Flexible Rod in a Quick Return Mechanism, 1988, Co-Chair with R.A. Scott
  10. Byeong C. Koh, A Computational Study of Linear Fracture Mechanics for Dissimilar Materials Using Adaptive Finite Element Methods with Hourglass Control, 1988, Chair, ( Technical Director, Production Engineering Center, Samsung Electrics, Korea )
  11. Somnath Ghosh, A New Finite Element Description for Large Deformation Analysis of Elastic-Visco Plastic Solids with Application in Metal Forming,1988, Chair, ( Associate Professor, Department of Aerospace Engineering and Engineering Mechanics, Ohio State University )
  12. Helder C. Rodrigues, Shape Optimal Design of Elastic Bodies using a Mixed Variational Formulation, 1988, Co-Chair with J.E. Taylor, ( Associate Professor, IDMEC, Technical University of Lisbon, Portugal )
  13. Toshikazu Torigaki, Contact and Impact Problems Using Adaptive Finite Element Methods, 1989, Chair, ( Manager and Principal Research Engineer, Central Research Laboratory, Nissan Motor, Japan )
  14. Wen-Lang Tsai, Application of Symbolic and Algebraic Manipulation Software in Solving Applied Mechanics Problems, 1989, Chair, ( Senior Engineer, Technical Center, General Motor )
  15. Byoung B. Yoon, Experimental and Computational Procedures for Invesstigating Frictional Behavior in Sheet Stretching, 1989, Co-Chair with R.Rao, ( Senior Manager, Development Group II, Data Commfs Division, Samsung Electrics, Korea )
  16. Sengkuh Lee, An Integrated Computer Aided Engineering Approach for Engine Cylinder Block Analysis Using Hexa8 Finite Elements, 1989, Co-Chair with D. Patterson, ( General Manager, CAD/CAM/NVH Technology Department, Daewoo Heavy Industries, Korea )
  17. Mandel J. Guedes, Nonlinear Computational Models for Composite Materials Using Homogenization, 1990, Chair, ( Associate Professor, IDMEC, Technical University of Lisbon, Portugal )
  18. Katsuyuki Suzuki,Shape and Layout Optimization Using Homogenization Method, 1991, Co-Chair with J.E. Taylor, ( Associate Professor, Department of Naval Architecture and Ocean Engineering, The University of Tokyo, Japan )
  19. Marcelo K. Alves, Analysis of Composite Materials Subjected to A Unilateral Contact Condition with Adhesion on The Interface of Its Constituents, 1991, Chair, ( Assistant Professor, Department of Mechanical Engineering, Federal University of Santa Catalina - UFSC, Brazil )
  20. Shin-Ya Liu, Elastic-Plastic Contact Analysis of Laterally Loaded Piles, 1990, Co-Chair with R.A. Scott, ( Associate Professor, Department of Civil Engineering, Tainan University, Taiwan )
  21. Wen-Tsung Chuang, Analysis of The Crankshaft/Main-Bearings System of A Multi-Cylinder Engine, 1991, Co-Chair with G. Parsons, ( Principal Engineer, XXX )
  22. Heuigi Son, Dynamics of Prestressed Translating or Rotating Anisotropic Plates Subject to Transverse Loads and Heat Sources, 1992, Co-Chair with G. Ulsoy, ( Technical Director, Image and Media Laboratory,, LG Electronics Inc., Korea )
  23. Chao-Hsien Cheng, Modeling of The Thermal Elasto-Plastic Behavior for Composite Materials Using The Homogenization Method, 1992, Chair, ( Senior Research Engineer, Research Laboratories, Ford Motor )
  24. Hae C. Gea, Structural Optimization for Static and Dynamic Responses Using An Integrated System Approach, 1993, Chair, ( Associate Professor, Department of Mechanical and Aerospace Engineering, The State University of New Jersey RUTGERS )
  25. Whie Chang, Modeling and Numerical Analysis of Composite Manufacturing Processes, 1993, Chair, ( Manager, Advanced Vehicle Development Team, Technology Center, Samsung Motors, Korea )
  26. Robert R. Mayer, Application of Topological Optimization Techniques to Structural Crashworthness, 1994, Co-Chair with R.A. Scott, ( Research Engineer, R&D Center, General Motor )
  27. Guan-Jin Lin, Adaptive Remeshing Methods for Finite Element Simulation of Composite Material Processing, 1994, Chiar,
  28. Hsien-Chie Cheng, The Optimal Shape/topology design of structures for dynamic problems using the homogenization method, 1994, Chair, ( Senior Research Engineer, National Laboratory of Supercomputer , Taiwan )
  29. Youn-Kyu Park, Extensions of Optimal Layout Design Using the Homogenization Method, May 1995, Chair, ( Senior Stuff Engineer, Design Engineering Team, Technology Center, Samsung Motor, Korea )
  30. Hisashi Hrguri, Modeling and Numerical Analysis of Geometrically Nonlinear Composites with Incompressibility Constraint, Chair 1995, ( Senior Research Engineer, BridgeStone Tire Company, Japan )
  31. Yutaka Nagase, Three Dimensional Microscopic Asperity Deformation Analysis for Studing Apparent Friction Behabior in Metal Forming, Chair 1995, ( Manager, Sumitomo Metal Works, Wakayama, Japan )
  32. Roy Philip Johanson, Topology Optimization of Multicomponent Structural Systems, Co-Chair 1996 with Prof. P. Papalambros, ( Senior Engineer, ALTAIR Engineering, Troy )
  33. Kenjiro Terada, Global-Local Modeling for Composites by the Homogenization Method, Chair 1996, ( Associate Professor, Department of Civil Engineering, The University of Tohoku, Japan )
  34. Jun-Shiou Oh, Integrated Optimal Structural and Vibration Control, Chair 1996, ( Research @Engineer, US Amada, Irvine Research Center, California )
  35. Jun S.O. Fonseca, Design of Microstructures of Periodic Composite Materials, Chair 1996,@( Assistant Professor, Department of Mechanical Engineering, Federal University of Rio Grande do Sul - UFRGS, Brazil )
  36. Shih-Wei Hsiao, Numerical Analysis and Optimal Design of Composite Thermoforming Process, Chair 1997, ( Senior Research Engineer, Hon Hai Precision Ind. Co., LTD., Taiwan )
  37. Seung-Jae Min, Optimum Structural Topology Design for Multi-objective, Stability, and Trasient Problems using the Homogenization Design Method, Chaired 1997 , ( Research Associate, Department of Naval Architecture, University of Tokyo, Japan )
  38. Mary Frecker, Optimal Design of Compliant Mechanisms, Co-Chaired with Prof. S. Kota, 1997, (Assistant Professor, Department of Mechanical & Nuclear Engineering, Penn State University )
  39. Jun Zhang, Constitutive Modeling and Optimal Design of Polymeric Foams for Crashworthiness, Chaired 1998, ( Design Engineer, FORD Motor Company )
  40. Emilio C. N. Silva, Design of Piezocomposite Materials and Piezoelectric Tranducers using Topology Optimization, Chaired 1998, ( Assistant Professor, Department of Mechanical Engineering, National University of Sao Paulo, Brazil )
  41. Shinji Nishiwaki, Optimum Structural Topology Design Considering Flexibility, Co-Chaired with Prof. P. Papalambros, ( Senior Researcher, Toyota Central Research, Nagoya, Japan
  42. Todd W. McDevitt, Elastodynamics and Wave Propagation in Periodic Structures, Co-Chaied with Professor G. Hulbert, 1998, ( Post Doctor at Department of Mechanical Engineering, Duke University )

@

@

@

@

@

@