Journal Articles

2012

  1. JR Popp, KE Laflin, BJ Love and AS Goldstein, "Fabrication and Characterization of Poly(Lactic-co-Glycolic Acid) Microsphere/Amorphous Calcium Phosphate Scaffolds," Tissue Engineering and Regenerative Medicine, Vol 6(1), pp 12 - 20. (2012).

2011

  1. F Teyssandier and BJ Love, "MMA Polymerization and its influence on in situ resin viscposity comparing the power law model with other mathematical models of chemorheology," Journal of Applied Polymer Science, Vol. 120, pp. 1367-1371 (2011).
  2. JR Popp, KE Laflin, BJ Love and AS Goldstein, "In Vitro Evaluation of Osteoblastic Differentiation on Amorphous Calcium Phosphate-Decorated Poly(Lactic-co-Glycolic Acid) Scaffolds," Tissue Engineering and Regenerative Medicine, Vol.5 (10), pp. 780 - 789, (2011).
  3. KA Juggernauth, AE Gros, NAK Meznarich and BJ Love, "In situ photogelation kinetics of nanoparticle-based fliuds and the influence of disperson formulations on gel formation," Soft Matter, Vol.7, 10108 - 10115, (2011).
  4. NAK Meznarich, KA Juggernauth, KM Batzli and BJ Love, "Structural Changes in PEO-PPO-PEO gels induced by methylparaben and dexamethasone pbserved using time-resolved SAXS," Macromolecules, Vol. 44 (19), pp 7792 - 7798 (2011).
  5. NAK Meznarich and BJ Love, " The Kinetics of Gel Formation for PEO-PPO-PEO Triblock Copolymer Solutions and the Effects of Added Methylparaben ," Macromolecules, Vol. 44, pp. 3548-3555 (2011).
  6. SS Prado, JM Weaver, and BJ Love, "Gelation of photopolymerized hyaluronic acid grafted with glycidyl methacrylate," Materials Science and Engineering C,Vol. doi:10.1016/j.msec.2011.08.008,(2011).

2010

  1. F Teyssandier and BJ Love, "Cure advancement of urethane networks using a sigmoidal chemorheological model," Polymer Engineering and Science, Vol. 50, Issue 3, pp. 499-503 (2010).
  2. F Teyssandier, M Ivankovic and BJ Love, "Modeling the effect of cure conversion on dynamic viscosity of epoxy resin cured by an anhydride curing agent," Journal of Applied Polymer Science, Vol. 115, pp. 1671-1674 (2010).
  3. ME Green, PB Goforth, LS Satin and BJ Love, " An integrated instrument for rapidly deforming living cells using rapid pressure pulses and simultaneously monitoring applied strain in near real time," Review of Scientific Instruments, Vol. 81, pp. Article # 125102 (2010).
  4. T Savart, C Dove and BJ Love, "In situ dynamic rheological determinations of polyacrylamide during gelation coupled with mathematical models of chemorheology," Macromolecular Materials and Engineering, Vol. 295, Issue 2, pp. 146-152 (2010).

2008

  1. Burguera, EF, Love, BJ, Sahul, R, Ngatu, G., and Wereley, NM, "A Physical Basis for Stability in Bimodal Distributions including Micrometer Sized Particles and Nanoparticles," Journal of Intelligent Material Systems and Structures, Vol. 19, Issue 11, pp. 1361-1367 (2008).
  2. Huyck RH, Trenor SR, Love BJ, Long TE , "Photodimerization of coumarin functionalized poly(alkyl acrylate) and poly(alkyl methacrylate) random copolymers: Influence of copolymer composition on photocrosslinking," Journal of Macromolecular Science, Part A, Pure and Applied Chemistry , Vol. 45, Issue 1, pp. 9-15 (2008).
  3. Love, BJ, Piguet-Ruinet, F, and Teyssandier, F., "Chemorheology of photopolymerizable acrylates using a modified Boltzmann sigmoidal model," Journal of Polymer Sciencer Physics Edition, Vol. in press, (2008).
  4. Love, BJ, Teyssandier, F, Sun, YY, and Wong, CP, "Sigmoidal chemorheological models for chip underfill materials offer alternative predictions of cure and flow," Macromolecular Materials and Engineering, Vol. 293, pp. 832-835 (2008).
  5. McKeon, KM and Love, BJ, "The presence of adsorbed protein on particles increases aggregation as measured by a light scattering technique," Journal of Adhesion, Vol. 84, pp. 664-674 (2008).
  6. Piguet-Ruinet F and Love BJ, " Dynamic photorheological analysis of photopolymerizable urethane dimethacrylate resins with varying diluent content and light fluence ," Journal of Applied Polymer Science, Vol. 107, pp. 1523-1529 (2008).
  7. Popp, JR, Love, BJ, Laflin, KE, and Goldstein, AS, "Composite calcium phosphate scaffolds for bone tissue engineering," Journal of Biomedical Materials Research, Vol. 14, pp. 829-830 (2008).
  8. Teyssandier, F, Sun YY, Wong, CP, and Love, BJ, "Cure vs flow in chip underfill," Macromolecular Materials and Engineering, Vol. in press, (2008).

2007 - 2004

  1. Cassino TR, Anderson R, Love BJ, Huckle WR, Seamans DK, Forsten-Williams K, "Design and application of an oscillatory compression device for cell constructs," Biotechnology and Bioengineering, Vol. 98, Issue 1, pp. 211-220 (2007).
  2. Love BJ, and Piguet-Ruinet F, "Analyzing the dynamic chemorheology of curing resins: extraction of model parameters associated with cure advancement ," Journal of Applied Polymer Science, Vol. 106, pp. 3605-3609 (2007).
  3. Popp JR, Love BJ, Goldstein AS, "Effect of soluble zinc on differentiation of osteoprogenitor cells," Journal of Biomedical Materials Research, Vol. 81A, Issue 3, pp. 766-769 (2007).
  4. Whited BM, Skrtic D, Love BJ, Goldstein AS, "Osteoblast response to zirconia-hybridized pyrophosphate-stabilized amorphous calcium phosphate," Journal of Biomedical Materials Research, Vol. 76A, Issue 3, pp. 596-604 (2007).
  5. Burguera, EF and Love BJ, "Reduced transglutaminase-catalyzed protein aggregation is observed in the presence of creatine using sedimentation velocity," Analytical Biochemistry, Vol. 350, Issue 1, pp. 113-119 (2006).
  6. Wereley NM, Chaudhuri A, Yoo JH, John S, Kotha S, Suggs A, Radhakrishnan R, Love BJ, Sudarshan TS, "Bidisperse magnetorheological fluids using Fe particles at nanometer and micron scale," Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 5, pp. 393-401 (2006).
  7. Whited BM, Goldstein AS, Skrtic D, Love BJ, "Fabrication and characterization of poly(DL-lactic-co-glycolic acid)/zirconia-hybridized amorphous calcium phosphate composites," Journal of Biomaterials Science, Polymers Edition, Vol. 17, Issue 4, pp. 403-418 (2006).
  8. Trenor SR, Long TE, Love BJ, "Crystallization of photo-chain extended poly(ethylene glycol)," European Polymer Journal, Vol. 41, Issue 2, pp. 219-224 (2005).
  9. Trenor SR, Long TE, Love BJ, "Development of a light-deactivatable PSA via photodimerization," Journal of Adhesion, Vol. 81, Issue 2, pp. 213-229 (2005).
  10. Dolez PI, Williams C, Goff A, Love BJ, "Properties of photopolymerisable acrylic adhesives for underwater bonding," Underwater Technology, Vol. 25, Issue 4, pp. 199-208 (2004).
  11. Esterly, DM and Love, BJ, "Phase transformation to beta-poly(vinylidene fluoride) by milling," Journal of Polymer Sciencer Physics Edition, Vol. 42, Issue 1, pp. 91-97 (2004).
  12. Jackson, ML, Love, BJ, "Dicyandiamide precipitation in epoxy solutions and latex dispersions: threshold concentration analysis using a two-stage drying model," Polymer, Vol. 45, Issue 21, pp. 7229-7238 (2004).
  13. Love, BJ, "Analytical model development for Stokes-type settling in a solidifying fluid," Particulate Science and Technology, Vol. 22, Issue 3, pp. 285-290 (2004).
  14. Suggs AE, Dolez PI, Love BJ, "Adaptation of acrylic photopolymerized resins as model bone cements in total hip arthroplasties," Journal of Adhesion Science and Technology, Vol. 18, Issue 10, pp. 1091-1101 (2004).
  15. Trenor SR, Long TE, Love BJ, "Photoreversible chain extension of poly(ethylene glycol)," Macromolecular Chemistry and Physics, Vol. 205, Issue 6, pp. 715-723 (2004).
  16. Trenor SR, Shultz AR, Love BJ, Long TE, "Coumarins in polymers: From light harvesting to photo-cross-linkable tissue scaffolds," Chemical Reviews, Vol. 104, Issue 6, pp. 3059-3077 (2004).
© 2012 B.J.Love. All rights reserved.